Short answer. Hidden-hanger spacing on a PrimeFlow residential gutter is the spacing written for that run. The terms of service describe hidden hangers approximately every 16 inches, only to the extent shown on the drawing. This page does not publish a wind speed, and it did not read a hanger manufacturer’s spacing chart.
The terms name the spacing PrimeFlow uses on the drawing.
The terms of service say gutter work may include seamless aluminum gutters in .032 aluminum, oversized downspouts, and hidden hangers approximately every 16 inches, but only to the extent shown on the drawing and priced in the quote. That sentence is the practice. It is the owner-confirmed installation description. It is not a sentence from the Florida Building Code, and it is not a wind-speed table.
This page does not print a manufacturer chart.
Hanger makers publish their own spacing instructions with the product. None of those sheets was read for this article, so none of their numbers is repeated here. Contractor blogs that assign a Florida wind speed to a hanger spacing were not used. If a run needs a different spacing, the drawing says so before the crew hangs it.
- Hidden hangers on applicable PrimeFlow residential installs.
- About 16 inches on a standard run, confirmed on that drawing.
- Corners, outlets, and long runs are called out on the same drawing.
- Fascia condition is reviewed with the trade that owns the fascia.
Wind exposure is a reason to look at the run, not a number on this page.
An open lot, a tall elevation, and a coastal edge can change how a gutter is specified. PrimeFlow confirms the hanger layout on that property. This article does not convert exposure into miles per hour, and it does not say the code requires 16 inches or .032 aluminum. The sag-and-pull guide explains what a loose hanger looks like after the fact. It is a separate page.
Orlando and Sarasota are specified on their own drawings.
The same practice is available in both markets. The drawing is still per property. Orlando requests use the Orlando seamless page and (407) 902-7639. Sarasota requests use the Sarasota seamless page and (941) 404-3901. A Sarasota barrier-island house is not ordered by copying an Orlando note.
The warranty covers the installation workmanship
PrimeFlow offers a 7-year workmanship warranty. The written agreement states it. The warranty is not a claim that a hanger spacing meets a wind-load calculation.
The estimate shows the hanger layout that will be installed.
A free estimate names the profile, the hanger type, and the spacing on that drawing. Declined changes stay outside the warranty, on the terms that say declined recommendations are excluded. This page does not price a hanger.